Front brake lever
Pull in the lever (1) towards the handgrip to operate
the front brake. The system is hydraulically operated
and you just need to pull the lever gently.
The control lever (1) has a dial (2) for adjusting the
distance between lever and handgrip.
The lever distance can be adjusted through 33 clicks
of the dial (2).
Turn clockwise to increase lever distance from the
twistgrip. Turn the adjuster anticlockwise to
decrease lever distance.
Before using these controls, thoroughly read
instructions under paragraph "Moving
Set front brake lever when motorcycle is
stopped.
Fig 45
81
To Next Page
Loading...
