Ducati DESERTX - Restoring Motorcycle Operation Via the PIN Code

Restoring motorcycle operation via
the PIN code
In case of key acknowledgement system or key
malfunction, the instrument panel allows the user to
enter his/her own PIN code to temporarily restore
motorcycle operation.
If the PIN code was activated via the “ PIN Code”
function in the  menu” (see page 158), the
instrument panel displays “PIN Code” with four
spaces for the four digits of the PIN code.
Entering the code:
●
The values displayed above the digit indicate
that the number can be changed from 0 to 9
using  (1) and (2).
●
Press ENTER (3) to confirm and move on to the
following digit.
●
Repeat the procedure until entering all 4 digits.
Once the  digit is set, press ENTER (3) and the
instrument panel behaviour will be as follows:
●
if there is a problem during the PIN check, the
instrument panel displays “Time out” for 2
seconds and then passes to the main screen;
●
if the PIN code is not correct, the instrument
panel displays “Wrong” for 2 seconds and then
0 0 0 0
1
2
PIN code:
2
2
2
2
2
1
3
2
Fig 42
77