Themes
This function allows the light or dark theme of the
display to be set.
●
From the Interactive Menu, use (1) and
(2) to select the item menu" and press
ENTER (3).
●
Select the “Display setup” item and press
ENTER (3).
●
Select the "Themes" item and press ENTER (3).
The “Auto”, “Light” and “Dark” items are displayed.
The currently set mode is shown at the of the
screen.
The "Auto" mode allows the display theme to
automatically change according to the ambient light
detected by the instrument panel.
Use (1) and (2) to scroll and select the desired
theme. Press ENTER (3) to validate, then select
"Back", and press ENTER (3) again to exit.
Note
In case of disconnection, the "Auto"
mode is automatically set.
Display setup Themes
Auto
Auto
Light
Back
N
Gear
Dark
Fig 128
216