If the teach-in procedure is completed correctly, the
instrument panel shows “Completed” (C) followed by
the previous menu a few seconds.
The procedure can be by holding (1)
pressed for a long time: in this case the instrument
panel displays all previous information, replacing
message "In progress” (B, Fig 144) with message
(D) followed by the previous menu a
few seconds.
Tyre calibration
Gear
SPORT
250
km/h
Aborted
Keep speed
49-51 km/h
and 2nd gear
Tyre calibration
Gear
SPORT
250
km/h
Completed
Keep speed
49-51 km/h
and 2nd gear
C D
Fig 145
235
To Next Page
Loading...
