Connecting the to the charger
Connect the charger (C) positive (6a) and
negative (5a) leads to the terminals: the red
one (8) to the positive terminal (+), the black one (9)
to the negative terminal (-).
Connect the plug of the charger to the wall
outlet.
Do not use chargers for lead or any
other type of maintainer/charger. Charge
the ensuring the vehicle is in a room with a
temperature below 40° C (104° F).
Keep the out of the reach of children.
Use only the Ducati-approved charger
(C) for lithium also as a maintainer. Do not
use the charge maintainer kit no.
69924601A (various countries) or charge
maintainer kit no. 69924601AX (for Japan, China and
Australia only), as it is specific for lead
Fig 178
Fig 179
268
To Next Page
Loading...
