Duplo DC-6 - Inside Components

2
5
Part Names and Their Functions
Before Using This Machine
1
Inside
No. Name Function
1 Double feed detection
(Optional on 115V
model and 230V Asia
model)
Detects double feed by ultrasonic sensor.
2 CCD (Optional on 115V
model and 230V Asia
model)
Reads REG mark/Barcode.
3 Slitter module 1,2 Cuts side margins parallel to the document feed direction.
4 Slitter module 3,4 Cuts parallel to the document feed direction.
5 Slitter module 5,6
Cuts parallel to the document feed direction.
6 Gutter defl ector Drops the margin cut off by the slitters into the waste box.
7 Cutter module Cuts perpendicularly to the document feed direction.
8 Creaser module Creases perpendicularly to the document feed direction.
3
2
1
8
4
5
67
3
4
56