2
27
Before Preparing Document
Before Using This Machine
1
Limit of Slit
In Simple Mode, when the document width is bigger than 327.3 mm (12.8 inches) and a margin slit
on the operator’s side is smaller than 3.2 mm (1/8 inch), a warning message appears and then the
slit entering screen appears. (→ P.64 Exceeding max fi nished size )
This is an impossible JOB to process. Re-enter correct margin.
Document feed
direction
Document feed
direction
Document feed
direction
● Examples of impossible JOBs to process
• No left margin and no slit
• Right margin only
• Right margin and center slit only