Duplo DC-6 - Setting the Exit Tray; Installing the Perforation Unit

2
11
Preparation Before Use
Before Using This Machine
1
Setting the Exit Tray
As shown in the right fi gure, lift the exit tray.
There are three setting positions of the exit tray.
IMPORTANT
When the fi nished document size is A3 or longer,
or if the fi nished documents are adhered on the
tray due to static electricity, set the exit tray in the
downward position.
Attach the back guide and side guides.
Loosen the thumbscrew to remove the cover on the
ejection side of the DC-616.
Loosen the two thumbscrews on both sides of the
perforation unit.
Installing the Perforation Unit
The perforation unit is optional on
115V model and 230V Asia model.