Duplo DC-6 - Page 94

Specifi cations
78
Document Curl
Due to the automated slitter function design, the document path of the DC-616 is sensitive to
document curl.
If document curl is causing document jams, the following are suggestions for remedying the
problem:
1. Adjust the printing devices de-curler (if available).
2. Manually de-curl the stock before loading in the feed tray.
3. Turn the document over (reprogramming the job may be necessary).
4. Use different document stock.
DC-616 setup for model/region
Item
115V
NCSA
115V
NCSA
PRO
230V
EMEA
230V
AP
230V
AP PRO
1 Air knife Yes Yes Yes Option Yes
2 Double Feed
detection
Option Yes Yes Option Yes
3 CCD Option Yes Yes Option Yes
4 Perforation Unit Option Yes Yes Option Yes
5 Card Stacker Yes Yes Yes Option Yes
6 PC Controller Option Yes Option Option Yes
7 PC arm mount Option Yes Option Option Option
8 Long Paper Tray Option Yes Option Option Option