40
PC Controller Setting
PC Controller Setting
[Inch>> mm]
When you select the [Inch>> mm] check box, the
values entered in inches are converted to the values in
millimeters and displayed.
Click [WIZARD].
Select a JOB creating mode.
Select the [Advanced Mode] check box to select
Advanced Mode.
Clear the check box to select Simple Mode.
REFERENCE
Select a JOB number from the [JOB No] box, and click
[NEXT].
REFERENCE
You can set up to 80 JOBs.
The values entered before selecting the check box are
not converted.
Be sure to select the check box before entering values.
You can enter the values to three places of decimals in
inches.
Enter a JOB name in the [JOB Name] box, and click
[NEXT].
You can enter up to 30 characters.
REFERENCE
Usable characters;
• Alphabets (A to Z, a to z)
• Numbers
• Symbols
To Next Page
Loading...
