Duplo DC-618 User Manual

2
89
When Messages Appear
4
Troubleshooting
Message Status and Solution
CREASE TOOL (MALE) LOCK
Check documents in the creaser
section.
Check the crease tool (Male) is set
correctly.
to clear
Status: The crease tool (male) is locked.
Solution: Remove the documents from the creaser section
and then press the STOP key.
Check the crease tool (male) is set correctly.
(→ p.98 J06- * CHECK CUTTER/CREASER/
SLOT1/2/3)
EMERGENCY STOP
Release emergency stop switch to
clear
Status: Emergency stop.
Solution: Release the
emergency stop switch
.
If
EMERGENCY STOP
remains displayed even
after the
emergency stop switch
was released,
contact our service person.
TOP COVER OPEN
Close cover
Status: The
top cover
is open.
Solution: Close the
top cover
.
If
TOP COVER OPEN
remains displayed even
after the
top cover
was closed, contact our
service person.
FRONT DOOR OPEN
Close door
Status: The
front door
is open.
Solution: Close the
front door
.
If
FRONT DOOR OPEN
remains displayed even
after the
front door
was closed, contact our
service person.
DOCUMENTS IN MACHINE
Remove documents from feeder.
to clear
Status: Documents remain in the feed section.
Solution: Remove the documents from the feed section
and then press the STOP key.
(→ p.94 J03 FEED ERROR)
DOCUMENTS IN MACHINE
Remove documents from CCD
section.
to clear
Status: Documents remain in the CCD section.
Solution: Remove the documents from the CCD section
and then press the STOP key.
(→ p.96 J04 CHECK CCD SECTION)
DOCUMENTS IN MACHINE
Remove documents from Cutter/
Creaser/Slot1/2/3 section.
to clear
Status: Documents remain in the cutter/creaser/slot1/2/3
section.
Solution: Remove the jammed documents from the cutter/
creaser/slot1/2/3 section and then press the
STOP key.
(→ p.98 J06- * CHECK CUTTER/CREASER/
SLOT1/2/3)

Duplo DC-618 Specifications

General

Brand	Duplo
Model	DC-618
Category	Cutter
Language	English