Duplo Duprinter DP-203 User Manual

- 44 -
Push the
master set switch.
The master will be pulled in, and cut
automatically.
If the master does not go in, push the
yellow label slightly back.
10
Pull out the master and insert the arrow
on the yellow label until it contacts the
roller.
9
¡¡
If the master is wrinkled:push and hold the
master set switch
again, and push down
the
thermal head escape lever
2 or 3 times.
¡¡
When the master stops, make sure that
you remove the trimmed piece of the
master.
IMPORTANT
:
Remove the trimmed piece of the
master.
11
Close the document receiving tray
gently.
12
¡¡
The cutter will operate and stop after the
master is cut.
Remove the cut piece left inside the
machine.
IMPORTANT
:
MASTER SET SWITCH
THERMAL HEAD
ESCAPE LEVER
YELLOW LABEL
DOCUMENT RECEIVING TRAY

Duplo Duprinter DP-203 Specifications

General

Brand	Duplo
Model	Duprinter DP-203
Category	Printer
Language	English