33
6. SADDLE STITCHING PROCEDURE
1
Fine adjustment of folding side guide The folding side guide moves inward by about 1 mm/0.04 inch.
2
Fine adjustment of folding side guide The folding side guide moves inward by about 0.2 mm/0.008 inch.
3
Fine adjustment of folding side guide The folding side guide moves outward by about 1 mm/0.04 inch.
4
Fine adjustment of folding side guide The folding side guide moves outward by about 0.2 mm/0.008 inch.
5
Folding side guide operations Activates the folding side guide once.
6
Fine adjustment of folding back guide The folding back guide moves backward by about 0.1 mm/0.004 inch.
7
Fine adjustment of folding back guide The folding back guide moves backward by about 1 mm/0.04 inch.
8
Fine adjustment of folding back guide The folding back guide moves forward by about 0.1 mm/0.004 inch.
9
Fine adjustment of folding back guide The folding back guide moves forward by about 1 mm/0.04 inch.
bk
Folding back guide operations Activates the folding back guide once.
bl
Fold key Booklets are ejected after folding, and the step mode ends.
6-4. Checking the Finished Set
Check the sample booklets after adjustment.
When paper alignment is poor
Adjust the side jogger and back jogger again. ( Refer to page 31.)
When the stitching position and folding position do not match
Move the stitching position to the folding position
Adjust the position using the [Stitch Position Fine Adjustment key]. (
Refer to page 57.)
Move the folding position to the stitching position
Adjust the position using the [Fold Position Fine Adjustment key]. (
Refer to page 57.)
When the stitching position and folding position match, and both are to be moved
Adjust the position using the [Stitch Position Fine Adjustment key] and [Fold Position Fine Adjustment key].
( Refer to page 58.)
To adjust the stitching width
Adjust the position using the [Stitching Width Fine Adjustment key]. ( Refer to page 58.)
To Next Page
Loading...
Need help?
General