81
14. CLEANING
Shutter
Handle
To prevent accidents, be sure to turn OFF the power before cleaning.
❊
Cleaning the conveyance belt and rollers
Wipe with a cloth moistened with alcohol.
After cleaning, make sure that the alcohol has volatized
completely and dried before turning ON the power.
To clean the belt and rollers, use the handle.
Slide the shutter, mount the handle to rotate belts and
rollers.
NoteNote
After cleaning, be sure to close the shutter.
If left open, the safety switch functions, and this
machine will not operate.
❊ Cleaning the sensors (Ten spot)
Blow off dusts with air.
Sensor
Sensor
Sensor
Sensor
Sensor
Sensor
Sensor
Sensor
Sensor
Sensor