30
6. SADDLE STITCHING PROCEDURE
00000
01
420. 0
x
297 . 0
207. 0
x
297 . 0
Size change key
<MAIN MENU> Screen
MAINMENU ADJUST OPTION ACCESSOR
Perform paper size change
Confirming settings
Make sure that the values entered are all correct, and then
press the [Return key] on the touch panel.
Pressing the [Return key] saves the settings of the
memory number and returns to the <Main Menu> screen.
Pressing the [Back key] returns to the <Set Trimming
Position> screen.
420. 0
x
297 . 0
207. 0
x
297 . 0
Back key Return key
<Confirm Settings> Screen
Step
4
6-2. Changing Size
Press the [Size Change key] for more than one second to
change the size.
When size change completes, a beep sounds.
NoteNote
This machine moves left and right.
6-3. Adjustments Using the Step Mode
After changing the size, perform fine adjustments of each function in the step mode.
When the step mode completes, the newly adjusted value is saved as the new setting of the memory number.
NoteNote
Values shown in the Main Menu screen are replaced by values adjusted not only in the fine adjustment screen but also
in the step mode. However, the values shown in the setting screens of each Memory Number will remain the same.
They show values originally entered.
To Next Page
Loading...
Need help?
General