69
10. ERROR MESSAGES
10-6. Motor Error
This error message is displayed when an error occurs at
the motor.
The machine stops immediately. To correct this error,
open the top cover, or press the emergency stop switch.
If the error cannot be cleared, or if the error occurs again
after resuming operations, contact our service person.
Motor error
[E∗∗]Motor error (∗∗∗)
10-7. Service Person Error
When errors starting with codes T01 are displayed, errors
which the user cannot correct may have occurred.
Turn off the power and then turn it on again, and resume
operations from the beginning. If the same error occurs,
contact our service person.
Inverter error
Relay trouble
Memory data error
Communication error
10-8. Shutter
This error message is displayed when the shutter is open. Close the shutter
Shutter
[C05]Shutter
To Next Page
Loading...
Need help?
General