How to fix cloudy water in DURAVIT Pool Hot Tub after disinfection?
To resolve cloudy water in your DURAVIT Hot Tub that cannot be set within the recommended limits despite disinfection, carry out basic cleaning. (see “Pool cleaning” in the chapter “Water treatment”)
What does continuous acoustic signal from DURAVIT Pool Hot Tub mean?
If a continuous acoustic signal sounds from your DURAVIT Hot Tub, it indicates a heating defect. Please call Customer Service.
Details the functions of each button on the remote control.
Illustrates the buttons and display screen of the main control panel.
Defines the correct and intended use of the pool.
Lists critical safety instructions to prevent accidents and injuries.
Explains the function of the circuit maintaining water quality and temperature.
Guides on how and why to change the pool water regularly.
Describes ECO-mode and Standby-mode for reduced energy consumption.
Step-by-step guide to charging the remote control for the first time.
Instructions for preparing and installing the pool's filter system.
Setting up language, time, and units on the operator's panel.
Detailed process for filling the pool to the correct level.
Steps to check and maintain water quality after filling.
Explains the buttons on the remote control and the main control panel.
How to activate, adjust, and deactivate the Emotion circuit.
Explains why regular water treatment is crucial for pool hygiene.
Detailed steps for measuring and adjusting the water's pH level.
How to check and maintain the Total Alkalinity of the pool water.
Procedures for disinfecting the pool water using appropriate chemicals.
Guidance on cleaning and changing the filter cartridge.
Comprehensive steps for cleaning the entire pool system.
To Next Page
General