DURKOPP ADLER 559 User Manual

Setting the sew ing equipment
–
Press the keys “P” and “F” of the control panel simultaneously.
–
Enter code “2548”.
–
Press the “OK”key.
The control switches to the technician level.
–
Select the menu “500" (configuration automatic buttonholer).
–
Press the “OK”key.
–
Select the menu “511"
–
Press the “OK”key.
–
Set the sewing equipment (the seam width will then be adjusted
automatically to match the sewing equipment - see table).
Class Sew ing equipment
narrow w ide
559 - 151 E1501 E1521
E1502 E1522
E1504 E1524
E1551 E1571
E1553 E1573
E1590 E1595
Correction
–
Unscrew the side cover at the arm 1.
–
Screw out screw 3.
–
Screw the screw in drill-hole A or B according to the desired seam
width.
–
Switch the machine on.
Attention: Danger of breakage!
After altering the seam width, correct the looping stroke in any case.
26
B2 A 1
BA 3

DURKOPP ADLER 559 Specifications

General

Brand	DURKOPP ADLER
Model	559
Category	Sewing Machine
Language	English