10.4 Cutting pressure
Standard checking
The cutting pressure is adjustable in order to keep the s train of all
components as low as possible and to increase the durability of the
cutting knife.
According to the sewing material and the material thickness the cutting
pressure should be adjusted as low as possible. However, it has to be
adjusted in such a way that the material is safely cut.
The cutting pressure is coordinated to the different cutting lengths in
the program.
Correction
–
See menu item 601.
10.5 Cutting duration
Standard checking
It is possible to set the cutting duration, to avoid an unnecessary long
cut on the material to be processed thus allowing a clean result.
Correction
–
See chapter 24.6.4 see menu item 504
33
To Next Page
Loading...
Need help?
General
