Control panel
Instructions for use DAC basic/classic - DAC eco plus - OP4X00 - 00.0 - 04/2024 23
Bobbin stitch
counter
• A long press adjusts the
value at which the bob-
bin is to be changed
• A short press resets the
bobbin stitch counter
p. 27
Piece counter • Activates or deactivates
the piece counter or
resets the piece counter
p. 28
Speed • Defines the maximum
permissible speed
p. 29
Soft start • Activates or deactivates
the soft start
• Soft start refers to start-
ing the machine at a
slower speed. This
function ensures that
the sewing process
starts reliably. After a
certain number of
stitches, the machine
runs at the set speed.
Sewing foot lift
after thread
trimmer
• Activates or deactivates
the sewing foot lift after
thread trimmer
• The sewing foot lift after
thread trimmer lifts the
sewing foot after the
thread is cut.
Sewing foot lift
after sewing stop
• Activates or deactivates
the sewing foot lift after
sewing stop
• The sewing foot lift after
sewing stop lifts the
sewing foot after a sew-
ing stop.
Tile Function Reference
To Next Page
