1111
CAUTION
Only connect the toilet to tap water.
*
Otherwise, this may cause corrosion inside this product, resulting in electric shock, fire, or inflammation of skin.
This product should be supplied with a cold water line only, as supplying it with a
hot water line may damage its internal components.
If cracks appear anywhere on the toilet bowl, do not touch the cracked areas.
Contact our company for instructions on how to replace the bowl.
Do not lean back against the toilet seat lid, as this may damage or break the lid.
Do not expose the toilet to any force or impact, as this may cause product damage,
injuries, and water leakage.
Regularly check the area around pipes for water leakage.
If you are not going to be using this product for a long period of time, close the water shuto
valve and drain the water from the toilet. In addition, disconnect the power plug from the outlet.
(Page 55 for more information)
Disconnect the power plug from the outlet during cleaning.
* Failure to do so may cause electric shock.
(Ensure the power is turned on when using the nozzle cleaning function.)
If it is necessary to modify the electrical wiring or plumbing, our company
recommends that such work should be performed by a licensed contractor.
Take care that children, the elderly or persons with limited mobility do not fall when
using this product.
* They may be injured or damage the device.
When a small child is using the toilet, set the Auto Seat Open switch on the remote control to
the OFF position. On rare occasions, the seat sensor may not be able to detect the presence
of a small child. In such a case, the toilet lid may start to close when the toilet is in use.
Save These Safety Precautions
Safety Precautions
To Next Page
