DXV AT200 - Troubleshooting - Auto Seat Open; Auto Seat Open;Close Malfunctions

5858
DisconnectingtheWaterSupplyHose
Remove the clip ring before disconnecting
thewatersupplyhose.
1 Insertaflatscrewdriverintothegap.
* The clip ring is designed so that the locking tab
catches the other end of the ring.
2 Press the screwdriver down, as shown in
thediagram.
3 Push the screwdriver forward to release
thelockingtab.
* Lightly twist the screwdriver to push it forward
easily.
Connecting/DisconnectingtheWaterSupplyHose