3131
Lowering the Water Pressure
For users who are sensitive to water pressure, the water pressure setting for the rear cleansing, rear cleansing - mild
and front cleansing can be adjusted below the normal range. The default setting for this feature is OFF. To activate
this feature, follow the steps below.
Press the Seat temp. [C] and Nozzle Cleaning [D] buttons
simultaneously for 2 seconds.
* A short beep sounds when the setting is complete.
To return to the default
setting
Press the Nozzle Cleaning [E] and
Min. [F] buttons simultaneously,
again, for 2 seconds.
* A short beep sounds when the setting is complete.
[C]
Comfort Features
* If the tap water
pressure is low, the
water sprayed from
the nozzle may not
reach the user at the
lowest setting.
[D]
[E]
[F]
To Next Page
Loading...
