DXV AT200 - Troubleshooting - All Functions; No Operations and Remote Control Issues

5555
To prevent damage that may result from freezing water, follow the procedures described below. When
performing these procedures, the power save feature should be turned off.
GeneralAnti-freezeMeasures
1 Settheseattemperatureto“high”and
closetheseatlid.
2
Turnoffthepowersavefunction.(Page26)
3 Heatthetoiletroom.
* If the toilet room cannot be warmed, perform the
following antifreeze procedures.
The automatic antifreeze function includes an automatic drain method and an intermittent flushing
method.
Select either method according to the antifreeze method of the toilet.
*Antifreeze method of the toilet: Automaticdrainmethod → Drains water whenever a user leaves the toilet seat.
Intermittent flushing method → Flushes the toilet periodically.
AutomaticDrainMethod
Water is drained whenever a user leaves the toilet seat to prevent water from freezing.
1 PressthePowersave[A]andAutoCleanbuttons[B]
simultaneouslyfor2seconds.
* Water is drained (for 15 seconds) immediately after a user
leaves the toilet seat.
* A short beep sounds when the setting is complete.
To cancel the automatic drain function
PressthePowersavebuttonandAutoCleanbuttons simultaneouslyfor2seconds.
* A beep sounds when the setting is canceled.
CAUTIONCAUTION
Ifthereisanypossibilityofthewaterfreezing,besuretoactivatetheanti-freezefunction,
asdamageduetofreezingmaycausereorooding.
Preventing Freezing
[A]
[B]