DXV AT200 - Front Cleansing; Spray - Super

2121
For front cleansing
This spray nozzle is designed for women’s use only.
•PresstheBidetbutton[B].
* Water will drip from the nozzle. This washes the nozzle before use.
The nozzle extends and water sprays.
•PresstheSTOP[A]button.
* The spray will stop and the nozzle will retract.
Toadjustthewaterpressure
Press or onthe“Spray
Strength”button[C].
* The water pressure can be adjusted to any of six levels. Select
the water pressure as desired.
Tochangethecleansingmode
PresstheBidetbutton[B]asecondtimeduringfrontcleansing.
* Pressing Bidet during front cleansing alters the mode.
* Once the cleansing is stopped, the cleansing mode starts with front cleansing when Bidet is pressed.
[Note]
• If the toilet is flushed while the front cleansing function is in use, then the front cleansing function will stop.
The front cleansing function cannot be started while flushing the toilet.
Front cleansing
Equipped with an auto-stop function which terminates cleansing after 2 minutes.
However, when the oscillating spray is activated while the front cleansing function is performed, the cleansing time will be
lengthened by 2 minutes. This will automatically stop after the cleansing has been performed for up to 6 minutes in total.
The nozzle moves back and
forth to wash a wide range.
The nozzle moves back and forth
over a short span for more thor-
ough cleansing.
Front cleansing Oscillatingspray Oscillatingspray-super
[C]
[B]
[A]
GeneralOperation