DXV AT200 - Cleaning the Nozzle - Manual Steps; Rear and Front Nozzle Cleaning

4444
• Cleanthenozzleguardwithadampenedsoft
clothorsponge.Asmentionedpreviously,
useamild,liquidall-purposecleanser.
[Note]
• Avoidwipingwithadryclothortoiletpaper,asthis
causescratches.
• Avoidusinganabrasivebrushorcleanser.
The nozzle guard can be removed for easy cleaning.
See the procedure below.
Removing the Nozzle Guard
1 TurnofftheAutoCleanandAutoSeat
Openbuttons.
* This will disable the automatic lid and automatic
flush functions.
2 Lifttheseatlidandseat.
3 PresstheNozzleCleaningbutton[A].
Whenthenozzleprotrudes,presstheSTOP
button[B]tostopthemotion.
* The shower nozzle protrudes and pushes up the
nozzle guard.
4 Liftthenozzleguardwithbothhands,pull
it upward, and remove it as shown in the
diagram.
5 PresstheSTOPbuttontoreturnthenozzle
toitsoriginalposition.
6 Cleantheremovednozzleguard.
CleaningtheNozzleGuard
[A]
[B]