. .
Dyadic Systems – Mechatronics Cylinder Manual MF-005500-EN-63/63
2. Remedy
Please turn the power OFF and remove the external load to the actuator.
Please turn the power back ON, and try to run the actuator without any load.
If the shaft remains seized, please turn OFF the power and try several times to move the actuator
manually in the direction that the actuator was trying to move.
If the problem cannot be resolved, please replace the actuator.
2-60 Uneda-Nishi, Kanazawa
Ishikawa-Ken, 920-0342 Japan
Tel: 81-76-267-9103, Fax: 81-76-267-9104
Manufactured by:
Mirai Inter-Technologies Systems Ltd.
30 Pollard St.
Richmond Hill, ON L4B 1C3 Canada
Tel: 905-763-9442
Fax: 905-763-9766
Imported by:
To Previous Page
Loading...
