Need help?Do you have a question about the DYNACO Slimline Series and is the answer not in the manual?
General| Category | Gate Opener |
|---|---|
| Manufacturer | DYNACO |
| Series | Slimline Series |
| Battery Backup | Optional |
| Safety Features | Obstruction detection |
| Remote Control | Yes |
| Motor Type | DC 24V |
| Operating Temperature | -20°C to 60°C |
General information regarding symbols and reading the manual before connecting power.
Read instructions, precautions for installation, operation, maintenance, and electrical work.
Safety measures when working with the frequency inverter, including discharge time.
Contact person, check dimensions and unpack door components.
Instructions and diagram for assembling the door components on the ground.
Procedure for lifting and moving the door to the construction opening.
How to attach the door structure to the wall securely.
How to insert retaining straps into side guides, protect the curtain, and ensure correct positioning.
Connecting the control box, motor, encoder, safety equipment, and accessories.
Functions of the DYNALOGIX II for monitoring and troubleshooting door operations.
Diagram and explanation of the DYNALOGIX II controls and connections.
Table detailing messages displayed by DYNALOGIX II and their causes.
Warning on power supply, NEC compliance, and steps for primary, encoder, and accessory connections.
Turning on the main disconnect to power the door.
Finalizing the door by setting limits and connecting accessories.
Detailed steps for setting door open/close limits, photo eye shut-off, saving settings, and ready mode.
Setting timers to prevent continuous running of the door.
How the curtain self-repairs after minor collisions.
Safety aspects due to no rigid elements and presence of detectors.
Preventive maintenance frequency and scope.
Step-by-step guide to replace the lubrication system.
To Next Page