DynaGen GSC400 Series User Manual

15 of 44
User Manual for the GSC400 Programmer and PC Interface
3. The Device
Manager
Window will
open. Scroll
down to Ports
and click on the
plus sign to
expand the
group. You will
see USB Serial
Port with the
COM port it is
using in
brackets. This
is the COM port
you use in the
PC Interface.
If you do not see
the Ports group in
this window then
the computer has not detected the GSC400 Programmer. Make sure the
programmer is plugged in correctly and the GSC400 is powered.
Figure 23 – Vista Device Manager

DynaGen GSC400 Series Specifications

General

Brand	DynaGen
Model	GSC400 Series
Category	Controller
Language	English