20 of 44
User Manual for the GSC400 Programmer and PC Interface
2. Selecting the Controller Hardware Version
Go to Settings menu in the Top
menu. Under Settings there is
the Controller Hardware
Version menu; select the
hardware version of your
controller: LS or LSB.
The hardware version can be found on the serial Label on the back of the
GSC400. It will begin with GSC400-0-LS if the hardware version is LS or it
will begin with GSC400-0-LSB if the hardware version is LSB.
If your serial number has LX then check LS. If your serial number has LXB
then check LSB.
Figure 31 – PC Interface settings
menu.