Need help?Do you have a question about the Dynamic CT10 and is the answer not in the manual?
General| Connectivity | Bluetooth |
|---|---|
| Scanning Technology | Area Imager |
| Interface | USB |
| Supported Barcodes | 1D, 2D, Postal |
| Operating Temperature | 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Drop Specification | to concrete |
Details physical and performance characteristics of the CT10 scanner in a table format.
Explains how to enter, save, or exit the scanner's setting mode using barcodes.
Describes the process to reset the scanner to its original factory settings via a barcode.
Outlines the different scan modes like Manual, Continuous, Auto Power Off, and Auto-induction.
Guides on choosing between SPP and HID modes for Bluetooth communication.
Details the steps for establishing a Bluetooth connection, including PIN code configuration.
Provides step-by-step instructions for pairing the scanner with a Windows PC.
Outlines the process for connecting the scanner to a PDA using Bluetooth SPP.
Describes a simplified method for connecting to Android devices via Bluetooth.
Details a simplified method for connecting to iOS devices via Bluetooth.
To Next Page