To Next Page

To Previous Page

2.2 Setting up a BT connection

Specify the PIN Code, if you choose "The Default Value 1", the passkey for setting up a BT

connection is 10010; If you choose "The Default Value 2", the passkey for setting up a BT

connection is 40510.

For security concerns, the user can also specify a unique PIN code.

1、Read the "Enter PIN Code" barcode;

2、Read the setting barcodes of parameters' value in APPENDIX ONE, if the scanner

read the setting barcodes 1、5、1、5、1、5 in order, it means the PIN code is 151515.

Refer to APPENDIX I.

Note: Before the CT10 Scanner connects with the other devices, the user should pre-set

the scanner.

For example: The CT10 Scanner is trying to connect with a host computer, the setting

operation is according to the following steps:

1. Read the "Enter Setup" barcode;

2. Read the "Enable SPP" barcode;

3. Read the "Default Value 1"(PIN code is 10010);

4. Read the "Exit with Save" barcode.

（*）Default Value 1

10010

Default Value 2

40510

Enter PIN Code

Random PIN Code

Enter Setup

Exit with Save

Exit without Save

Dynamic CT10 User Manual

Questions and Answers: