63
3.7 CODE 93
Decide whether or not to enable Code 93. The CT10 Scanner defaults disable Code 93.
Note: Read the "Disable Code 93" barcode will make the scanner can not read the Code
93 barcode. Thus, if the scanner can not read the Code 93 barcode, please trying to read
"Enable Code 93" to reset.
For Example: Enable Code 93.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 93" barcode;
3. Read the "Exit with Save" barcode.
（*）Disable Code93
Enable Code93
Enter Setup
Exit with Save
Exit without Save
To Next Page
Loading...