69
3.11 UPC-A
3.11.1 UPC-A Output ‘0’
Decide whether or not to add "0" in the output of UPC-A data.
3.11.2 UPC-A Checksum Transmission
Decide whether or not to include the checksum character in the data being transmitted.
For example: UPC-A Output "0", Do Not Transmit UPC-A Checksum.
1. Read the "Enter Setup" barcode;
2. Read the "UPC-A Output "0"" barcode;
3. Read the "Do Not Transmit UPC-A Checksum" barcode;
4. Read the "Exit with Save" barcode.
UPC-A Output ‘0’
*UPC-A Do Not Output "0"
*Transmit UPC-A Checksum
Do Not Transmit UPC-A Checksum
Enter Setup
Exit with Save
Exit without Save
To Next Page
Loading...