Dynamic CT10 User Manual

7
Standard 25, 2/5 Matrix
Resolution 5mil
Nominal Working Distance 6~30cm
Decode Rate 200 decodes per second
Scan width 30mm=Scanner Window
Decode mode Single-Line Aiming
Scan mode Auto off mode / Manual mode
Print Contrast Minimum 30%
Scan angles Roll 30° Pitch 75° Yaw65°
Cylinder Horizontal Scan Diameter 35mm
Indication Beeper, LED
Radio Range 10m Visual range
POWER
Voltage DC 5V
Laser Safety Accord with national level two laser safety standards
EMC CE & FCC DOC Compliance
standby Current 35mA
Operating current 60mA
USER ENVIRONMENT
Operating Temp. 0 to 50
.
°C / 32 to 122°F
Storage Temp. 0 to 50
.
°C / 32 to 122°F
Operating Humidity 20-85% ( non-condensing )
Storage Humidity 20-85% ( non-condensing )
Drop Specifications Free fall of 1.5m air drop
Accessories Lithium battery, Charger., Data lines
Correct Aiming
Incorrect Aiming

Dynamic CT10 Specifications

General

Brand	Dynamic
Model	CT10
Category	Barcode Reader
Language	English