Dynamic Shark

Troubleshooting Guide 27
02
Loss of communication with attendant remote
Disconnect and reconnect attendant remote and try again
Check the attendant remote cables
If the fault doesn‟t go away, disconnect the attendant
remote as a temporary solution and contact Dynamic
Controls
Flash
Code
Fault source
Sub
code
Meaning & Remedy
10
Internal fault
00
Contact Dynamic Controls
Flash
Code
Fault source
Sub
code
Meaning & Remedy
11
Wrong
remote
00
Incompatible remote connected
Check that the brand on the remote and the power module
are the same
Notes for Flash Code 11:
1 Ensure the branding of the controller matches that of the remote.