Dynamic Shark User Manual

Further reading 31
Further reading
Dynamic Controls SHARK DK-PM(x) Installation Manual (GBK80262)
Dynamic Controls SHARK DK-REMA Installation Manual (GBK80260)
Dynamic Controls SHARK DK-REMB Installation Manual (GBK80261)
Dynamic Controls SHARK DK-REMD/REMDB Installation Manual (GBK80258)
Dynamic Controls SHARK DK-ACU Installation Manual (GBK80257)
For a complete list of programming and wiring information for the SHARK system, see the Power
Module Installation Manual (GSM80262).
Glossary
ACU
Attendant Control Unit – an optional remote for the use by an
attendant
Drive Program
Defines the drive performance of the powerchair
Fault Codes
A four-digit value indicating a fault – viewed with HHP, or Wizard
Flash Codes
A sequence of flashes on the Remote indicating an abnormal
condition
HHP
Hand-Held Programmer and diagnostics tool – used for reading and
changing parameters
Joystick
The lever on the remote used to control both driving and other
operations such as moving the seats
LED
Light Emitting Diode
OBC
On-board Battery Charger
OONAPU
Out Of Neutral At Power Up – a fault condition which prevents the
powerchair moving because the joystick is not in the centre position
SHARK system
The powerchair controller system
Wizard
A PC-based programmer and diagnostics tool
XLR
An industry standard socket used for charging the SHARK system

Dynamic Shark Specifications

General

Brand	Dynamic
Model	Shark
Category	Controller
Language	English