Dynapac CC1250 - Equipment Safety Decals

Safety First
14
2.2 Equipment Safety Decals
Before you operate, maintain, work around, or in any other way use this roller, read and understand the
safety decals and safety labels located on the roller. Follow all directions on the labels. Do not remove
or deface the labels. Replace them if they become damaged or lost
Table 2-1:Decal List
Decal Message Location
Warning - Crush zone
Quantity 2: Located on side of
the hydraulic reservoir.
Warning - Rotating engine
components
Quantity1: Located on rear left
side of the hood.
Quantity1: Located on rear right
side of the hood.
Warning: Hot surfaces
Quantity 2: Located on cooler
housing.
Warning: Instruction manual
Quantity 2: Located on top of
receiver and on receiver end
plate.
Warning - Risk of crushing
Quantity2: Located on the front
left and right side fork.
Warning: Combustible Gas
Quantity 1: Located on the
carrier battery box.