EasyManua.ls Logo

Dynapac CC1250 - Check the Instruments and Lamps; Interlock

Dynapac CC1250
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Check the Instruments and Lamps
35
Inspections and Operations
Note Make sure that the emergency stop is pulled out and the parking brake is activated. If the
forward/reverse lever is in neutral, the automatic brake function is engaged.
1.
Turn the switch to on position.
2.
Check that the warning lamps in the warning panel come on.
3.
Set the sprinkler switch to the operating position and check that the system is functioning.
Interlock
The roller is equipped with interlock. The diesel engine switches off after 10 seconds, if the operator
gets off the seat during tramming. If the operator is not seated during tramming a buzzer goes on
unless the parking brake is activated.
Note The diesel engine switches off immediately if for any reason the forward/reverse lever
is moved out of neutral when the operator is not seated and the parking brake button
has not been activated.

Table of Contents

Related product manuals