EasyManua.ls Logo

Dynapac CC1250 - Maintenance Schedule; Maintenance Schedule Information

Dynapac CC1250
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
46
7.2
Maintenance Schedule
Maintenance Schedule Information
The maintenance schedule shows those items requiring regular service and the interval at which they
are performed. A regular service program is geared to the items listed under each interval. These
intervals are based on average operating conditions. Before each consecutive interval is performed, all
of the maintenance requirements from the previous interval must also be performed.
Note In the event of extremely severe, dusty, or wet operating conditions, more frequent
maintenance than specified is necessary.
Note If the roller is operating under very severe conditions (such as very dusty air), the
scheduled maintenance intervals should be reduced
Table 7-1: Maintenance at Every 8 Hours or Daily
Description Action Lubrication
Engine oil
Check
Outer air cleaner element
Check
Radiator coolant
Check
Hydraulic oil
Check
Greasing
Grease
See lubrication chart
Table 7-2: Maintenance at First 50 Hours
Description Action Lubrication
Engine oil filter element
Change
See engine manual
Engine oil
Change
See engine manual
Fuel filter element
Change
See engine manual
Hydraulic oil filter
Change
Pre fuel filter element
Change
Table 7-3: Maintenance at Weekly/First 50Hrs
Description Action Lubrication
V-belt
Check
Water separator
Drain
AVM Bolts
Check

Table of Contents

Related product manuals