Dynapac CC1250 User Manual

Roller Identification
The machine Product Identification Number (PIN) plate is located on left hand side of the rear frame.
The PIN number is a 17 digit number which provides information about manufacturer, family model,
3
Introduction
check letter, no coding, production unit, and serial number.
Figure 1-2: Location PIN
A Manufacturer
A Serial number
B Family/Model
C Check lett
D No coding
E Production unit
F Serial number
Pin number is punched on top right side of front frame.
Figure 1-3: Location PIN
A Pin number

Dynapac CC1250 Specifications

General

Brand	Dynapac
Model	CC1250
Category	Construction Equipment
Language	English