Dynapac CC1250 User Manual

Instruction Manual Location
The instruction manuals are located under
operator seat within easy access.
Identification Data
An exact description of the model type and the
serial number of the roller facilitates fast and
Introduction
2
Figure 1-1: Instruction manual Location
efficient response from our parts and service
support operations.
Provide the model type and serial number while
contacting the local Dynapac service or parts
office.
Enter your roller data on the following lines to
maintain roller and engine information necessary
to facilitate fast and efficient response from our
parts and service support operations:
Model:
Roller Serial
Number:
Chassis VIN
Number:
A Manual location
Receiving the Roller
The CC 1250 roller has been tested, accurately
checked, and prepared for shipment. Every part of
the roller is accurately checked before being
shipped from the factory.
When receiving the CC 1250 roller and before
unpacking the equipment, check if damage has
occurred during transport and if any parts are
missing.
Check the equipment by consulting the shipment
documents.
If the goods are damaged or if parts are missing,
inform the freight agent and raise a complaint
against it.
Year of
Manufacture:
Engine (Mfg. and Type of
Engine):
Engine Serial
Number:

Dynapac CC1250 Specifications

General

Brand	Dynapac
Model	CC1250
Category	Construction Equipment
Language	English