Lubrication Chart
Periodic lubrication requirements are listed in the following Lubrication Chart. These requirements
include lubricant checks and greasing designated areas of the roller.
Description Part Number Remarks Quantity
Engine oil 4812161855 Dynapac engine oil 50 5 L (1.3 gallons)
Hydraulic oil 4812161868 Dynapac hydraulic 300 20 L (5.3 gallons)
Drum oil 4812161887 Dynapac Drum oil 1000 5L (1.3 gallons)
Coolant 4812161854 Dynapac coolant 100 20 L (5.3 gallons)
Drum gear oil 4812161858 Dynapac Gear oil 400 5L (1.3 gallons)
Refill Capacities
The following fluid capacities are provided for the servicing personnel who must perform roller
maintenance in the remote locations where complete shop facilities and resources are not available.
These capacities will give the servicing personnel an approximation of the fluid capacities of the
components to be serviced. Always use the specified method to check for accurate fluid levels.
Table 7-9: Refill Capacities
Component Approximate Quantity
5.5 L (1.4 gallons) Antifreez + 5.5 L
(1.4 gallons) Water
7 L (1.84 gallons)
To Next Page
Loading...
