DH200F User Manual
©Dyness reserves the copyright of this document.
Arc protection safety
Avoid arc, fire and explosion hazards caused by improper operation:
Prohibit touching the ends of potentially energized cables that are not insulated;
When a loose connection occurs in the power cable, or a screw or other component falls
out accidentally, do not operate it without authorization, and it must be handled by a
qualified professional to avoid causing a larger malfunction.
Daily operation and maintenance
All operations of the energy storage system should follow the instructions in the User
Manual. Damage to the equipment caused by violation of these instructions will void
the associated liability and warranty.
If necessary, contact Dyness Customer Service for repairs.
Routine operation and maintenance requirements
The software, housing and components of the device may not be changed without the
manufacturer's authorization. If changed, the corresponding liability and warranty shall
be void.
Do not remove or alter the nameplate;
Do not open the cabinet doors in inclement weather such as rain or strong winds;
Product obsolescence
When the product as a whole or individual internal components become aged or
damaged and need to be discarded, they cannot be disposed of as regular waste. Some
components inside the product can be recycled and reused. Improper disposal of certain
components may cause environmental pollution.
Please contact qualified local professional recycling organization for proper disposal of
the product and internal components.
To Next Page
Loading...