DH200F User Manual
©Dyness reserves the copyright of this document.
Both ends of all embedded pipes are temporarily sealed to avoid impurities from
entering. Otherwise, later wiring is inconvenient.
After connecting all the cables, inlets, outlets and connectors of the cable should be
sealed with refractory clay or other suitable material to avoid entry of rodents.
Please comply with local safety regulations and operational rules during the process of
ground cables embedding.
Installation space requirements:
Make sure that the equipment has enough space for better cooling and maintenance,
you are advised to reserve enough space around the cabinet installation position.
The reserved space in front of a single product should not be less than 1300mm.
The reserved space behind a single product should not be less than 800mm.
Figure 5-1 Installation Space Requirements
To Next Page
Loading...