Dyness EnerCore DH200F - Symbol Mark; Abbreviations

DH200F User Manual
©Dyness reserves the copyright of this document.
3
Table 1-1 Product Profile
No.
Model
Description
1
DH200F-S150L00
PV+ESS, PV: 150KW,
On-grid: 100KW, no off-grid
2
DH200F-S100L00
PV+ESS, PV: 100KW,
On-grid: 100KW, no off-grid
3
DH200F-S050L00
PV+ESS, PV: 50KW,
On-grid: 100KW, no off-grid
4
DH200F-S000L00
PV+ESS, no PV,
On-grid: 100KW, no off-grid
5
DH200F-S150L01
PV+ESS, PV: 150KW,
On-grid: 100KW, off-grid: 100KW
6
DH200F-S100L01
PV+ESS, PV: 100KW,
On-grid: 100KW, off-grid: 100KW
7
DH200F-S050L01
PV+ESS, PV: 50KW,
On-grid: 100KW, off-grid: 100KW
8
DH200F-S000L01
PV+ESS, no PV,
On-grid: 100KW, off-grid: 100KW
Symbol mark
This manual may contain the following symbols to emphasize important information, to
ensure the safety of the user's personal and property when installing this product, or to
facilitate the efficient use of this manual by the user, please read it carefully.
Table 1-2 Symbol mark
Indicates that there is high voltage inside the body,
so beware of electrocution resulting in personal
safety issues.
Indicates an electrical hazard, all external power
connections must be disconnected prior to
performing operational maintenance on the
equipment.
Anti-temperature marking
Ventilation marking
Indicate that there is the protective earthing (PE)
terminal, which is used to prevent electric shock in
the event of a fault, and needs to be firmly earthed to
ensure operator safety.
Abbreviations
References to the following products in this brochure are replaced by abbreviations for
ease of presentation