Dyness EnerCore DH200F - Guidelines for the Operation of the Manual; Use of Manuals; Applicable Products; Product Profile

DH200F User Manual
©Dyness reserves the copyright of this document.
2
1 Guidelines for the operation of the manual
CAUTION: Read this manual carefully before installing or operating this product. Keep
this manual in a safe place for future reference.
Use of manuals

Manual content: This manual mainly introduces the safety precautions, product
functions and specification parameters, delivery and storage, wiring installation,
product power up and down process, human-machine interface operation, system
maintenance and quality assurance of the Smart Energy Storage Outdoor Integrated
Cabinet.

Applicable population: This manual is suitable for professional technicians who install
and maintain the smart energy storage outdoor integrated cabinet, as well as users
who carry out daily operation. Readers need to have certain electrical knowledge and
electrical principles.
Applicable products
This manual applies to various models of EnerCore products, including DH200F-S150L00,
DH200F-S100L00, DH200F-S050L00, DH200F-S000L00, DH200F-S150L01, DH200F-S100L01,
DH200F-S050L01, DH200F-S000L01 models. S050L01, DH200F-S000L01 models. Product
names and system models are explained below:
 EnerCore: Product name

DH: Dyness high-voltage series products.
 200: battery capacity (specific equipment capacity is subject to the actual object)
 F: air cooling system
 S: photovoltaic, the number after S indicates the photovoltaic power, 000 indicates that
there is no photovoltaic in the initial setup, but the product is reserved for photovoltaic
access equipment, which can be expanded to access photovoltaic in the future;

L: on-grid and off-grid, the number 00 after L indicates pure on-grid (on-grid rated
power is 100KW), and the number 01 after L indicates on-grid and off-grid (both on-
grid and off-grid rated power is 100KW).
Product Profile

Function introduction: This product is an outdoor integrated cabinet that incorporates
an energy storage system, providing users with functions such as peak shaving and
load shifting, capacity reduction and demand reduction, new energy upgrading and
consumption, demand response and backup power and other functional services. It can
be widely used in charging stations, commercial buildings, manufacturing industry and
other industrial and commercial scenarios.

Optional models: The outdoor integrated cabinet of this product integrates battery
module, BMS, PCS, MPPT (optional), STS (optional), power distribution system, fire
protection system, air conditioning system, etc.. Various models can be configured
depend on the combination of different modules.