DH200F User Manual
©Dyness reserves the copyright of this document.
Table 3-4 BESS Appearance definition
Operation indicator, fault indicator, alarm
indicator
Regulates the temperature of the battery
compartment in the cabinet
The system stops when the button is pressed
* CAUTION: Do not operate the emergency stop button in a non-emergency
situation.
On the upper left side of the outdoor integrated cabinet, there are three indicator lights
showing the main operating status of the product, namely the power indicator "POWER",
the operation indicator "RUN" and the alarm indicator "FAULT".
Table 3-5 Indicator Definition
Constant light indicates power is applied
and ready for operation.
Constant light indicates normal system
operation, off indicates standby.
Constant light indicates a system
malfunction
Component Size:
The BESS is approximately 1846mm long, 1203mm wide (not counting the retainer) and
2250mm high (not counting the lifting ring), the BESS dimensions are as follows:
To Next Page
Loading...