Dyness EnerCore DH200F - Page 52

DH200F User Manual
©Dyness reserves the copyright of this document.
4949
10 Appendix
In order to better serve users, the company provides a list of check items, please check
whether the following steps have been completed before the product runs.
No.
Check item
Yes/No
1
Check whether the appearance is damaged and
whether the internal equipment is intact
☐
2
Check whether the cabinet assembly is firm
☐
3
Check whether the logo of the cabinet body and
components is clear or damaged
☐
4
Check whether the GRID wiring cables are connected
in the correct sequence of AC cables
☐
5
Check whether the LOAD wiring cables are connected
according to the correct sequence of AC cables
☐
6
Check whether the PV wiring cables are connected in
the correct sequence of DC cables
☐
7
Check whether the communication cable connection
is complete
☐
8
Check that the ground cable is faultless
☐
9
Check if the meter reads correctly
☐
10
Check that all connection points are connected
correctly and have good contact
☐
11
Check whether the manual operation parts are
normal
☐
12
Check whether the closing and opening of the circuit
breaker are normal
☐
13
Check whether the operation of relevant buttons and
related indicators are normal
☐
14
Check if the power light is normal
☐
15
Check if the operation light is normal
☐
16
Check whether the HMI screen is displayed normally
and no error is reported
☐
17
Check for lost tools and parts inside the equipment
☐
18
Check whether the cabinet door is closed and opened
flexibly
☐