DYNISCO UPR800 Series Instruction Manual
Page | 60
11.0 NORMATIVE REFERENCES
UL 94: Tests for flammability of plastic materials for parts in devices and
appliances.
EN 60529: Degrees of protection provided by enclosures (IP Code).
Nema 250-1991: Enclosures for electrical equipment (1000 Volts maximum).
DIN 43700: Measurements and control instruments for panel mounting;
Nominal front and cut-out dimensions.
EN 61010-1 Safety requirements for electrical equipment for measurements,
control and laboratory use
Part 1: General requirements
EN 61326-1 Electrical equipment for measurement, control and laboratory use -
EMC requirements.
EN 55011 Industrial, scientific and medical (ISM) radio-frequency equipment
Radio disturbance characteristics.
Limit and method of measurement.
EN 61000-4-2 Electromagnetic compatibility (EMC)
Part 4: Testing and measurement techniques
Section 2: Electrostatic discharge immunity test
EN 61000-4-3 Electromagnetic compatibility - Basic immunity standard -
Radiated radio-frequency electromagnetic field - Immunity test
EN 61000-4-4 Electromagnetic compatibility (EMC)
Part 4: Testing and measurement techniques
Section 4: Electrical fast transient/burst immunity test
EN 61000-4-5 Electromagnetic compatibility (EMC)
Part 4: Testing and measurement techniques
Section 5: Surge immunity test
EN 61000-4-6 Electromagnetic compatibility-Basic immunity standard-
Conducted disturbances induced by radio-frequency fields
Immunity test
EN 61000-4-11 Electromagnetic compatibility (EMC)
Part 4: Testing and measurement techniques
To Next Page
Loading...
Need help?
General
